MV Heating MV Airo 2, Руководство по ремонту, Страница: 14 / 18

+44 (0)23 8052 2345
13
MV Heating UK Ltd
Part 5 Cont’d : Burner, Glow Pin, and Combustion
Chamber
Tools:
•
1 x Small Flat-Bladed Screwdriver
•
1 x 5.5mm Socket Screwdriver
•
1 x Small Phillips Head Screwdriver
Glow Pin Removal:
1) One the burner has been removed, use a Phillips head screwdriver to
loosen the screw holding the glow pin ( 2:10 ) in place.
2) Gently remove the glow pin from out of its housing (the glow pin can be
tight to remove).
3) The burner and glow pin can now be inspected, cleaned or replaced as
necessary.
Refitting the Glow Pin:
1) Feed the glow pin back through the appropriate slot on the burner and
reinsert it fully into position.
2) Tighten the small Phillips head screw onto the glow pin to 0.8 ± 0.08 Nm
to hold it securely in place.