MV Agusta F4 1000 S, Руководство по ремонту

Страница: 213 / 428

Suspension and wheels
Wheel spindle check
Place the wheel spindle on two v-prisms on a flat sur-
face.
Utilising a dial gauge, check that the eccen-
tricity in the central part does not exceed
0.05 mm.
Wheel assembly
If the front tyre is substituted, before assem-
bling the wheel it is necessary to balance the
wheel following the indications in page 77.
After having carried out the check on the parts of the
front wheel, accurately clean the wheel spindle and
assemble it from right to left. Tighten the screw ring of
the wheel spindle to the torque prescribed utilising the
special tool. Ensure that when the wheel is mounted
into place, the screw ring of the wheel spindle must be
on the left side of the motorcycle.
Apply grease only to the first threads.
Torque pressure: 38 ÷ 40 N·m
Special tool No. 8000B4412
F
- 9 -
Fit the wheel-spindle assembly on the front suspension
pins without pressing axially on the fork legs.
Tighten the two screws to the torque pressure pre-
scribed.
Mount the two brake calipers as described in chapter H
“Brakes”.
Torque pressure: 20 ÷ 22 N·m
During the operation, support the front
wheel so as to prevent the screws from
sticking.
38÷40 N•m
20÷22 N•m