HDMI 2.0 Fiber Extender Kit, Single Mode Operation Manual
MuxLab © 2022 3 94-000971-A/SE-000971-A
1.
Safety Precautions
To ensure the best performance from the product, please read all instructions carefully before using
the device. Save this manual for future reference.
⚫
Follow basic safety precautions to reduce the risk of fire, electrical shock, and injury.
⚫
Do not dismantle the housing or modify the module. It may result in electrical shock or burns.
⚫
Do not open or remove the housing of the device as you may be exposed to dangerous voltage
or other hazards.
⚫
To prevent fire or shock hazard, do not expose the unit to rain, moisture and do not install this
product near water. Keep the product away from liquids.
⚫
Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object
or liquid falls or spills on the housing, unplug the module immediately.
⚫
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device
before cleaning.
⚫
Using supplies or parts not meeting the product specifications may cause damage, deterioration
or malfunction.
⚫
Refer all servicing to qualified service personnel.
⚫
Install the device in a place with adequate ventilation to avoid damage caused by overheat.
⚫
Unplug the power when left unused for a long period of time.
⚫
Information on disposal of devices: do not burn or mix with general household waste, please
treat them as normal electrical waste.
Copyright Notice
All contents in this manual are copyrighted, and cannot be cloned, copied, or translated without the
express permission of MuxLab Inc. Product specifications and information in this document are for
reference only, and the content may be updated from time to time without prior notice.
