MuxLab 500830, Руководство по установке и эксплуатации

Страница: 6 / 24

HDMI 2.0/3G-SDI Signal Generator
© MuxLab Inc. 2017 94-000850-A / SE-000850-A Page 6
signals transmitted on the HDMI output port, as well as to
control/navigation menus and device settings.
4.
HDMI Sync Status LED. Shows the HDMI link status and is lit
when the link is active. The LED will be off when the link is lost
or the HPD is not present from the sink device. The link will
blink if an EDID error exists.
5.
Convenient and ergonomic buttons for operating and
navigating menus and settings with Up, Down, Left, Right,
Enter (select) and Cancel buttons.
3.2 Rear Panel
1.
DB9 connector for RS232 control
2.
DB9 connector for RS232 cascade, to another tester
3.
USB port for control
4.
SDI out
5.
3.5mm jack for 2CH analog audio in
6.
HDMI out
7.
5V DC socket