© MuxLab Inc.
94-000972-A SE-000972-A
2321Rue Cohen, Montreal, Quebec, Canada. H4R 2N7
Tel: (514) 905-0588 Fax: (514) 905-0589
Toll Free (North America): (877) 689-5228
E-mail:
Specifications
Environment
HDMI 2.0
Devices
Computers and servers with HDMI monitor ports.
Transmission
Transparent to the user
Bandwidth (HDMI)
597MHz
Signals
HDMI 2.0 protocol, HDCP 1.4, HDCP 2.2
Connectors
Note: Cables not included.
One (1) HDMI receptacle.
One (1) RJ45S for Cat 5e/6 unshielded or shielded twisted pair.
Two (2) 3.5mm jacks for audio-in and audio-out (TX)/audio-out and Mic-In ( RX).
One (1) 3.5mm jack for directional Infrared port.
One (1) DB9 for RS232
One (1) 2.1mm locking barrel jack for power.
One (1) or Four (4) USB Connector(s) for Host (TX)/Client (RX)
Four (4) DIP Switches for device ID addressing.
Maximum Distance
Based on a maximum length
of 6.6ft (2m) of HDMI cable
per end.
Cat5e/6: 330ft (100m) up to 4K @ 60 Hz (4:4:4)
Note: When installed in an electrically noisy environment, an STP cable must be
used. Also, cross-connection reduces the effective distance depending on the grade
of twisted cable used.
Latency
One (1) Frame (16ms), maximum 2 frames (33ms)
Compression
JPEG 2000
Bandwidth
Up to 850 Mbps
Network Requirement
1000BaseT with PoE
RJ45 Pin Configuration
Reverse Polarity Sensitive.
Use EIA/TIA 568A or 586B
straight-through wiring.
RJ45 Link
Pin 1 (R)
Pin 2 (T)
Pin 3 (R)
Pin 6 (T)
Pin 4 (R)
Pin 5 (T)
Pin 7 (R)
Pin 8 (T)
Cable
One (1) Cat 5e/6 or better twisted pair cables required
Power Source
This device supports PoE (PD), an external power supply is not included. It is
intended to be powered via a PoE (PSE) Ethernet Switch. If required, an optional
power supply (500993) may be purchased separately.
PoE Standard
IEEE 802.3af
Power Consumption
Transmitter: 6Watts
Receiver: 8Watts
Temperature
Operating: 0° to 40°C
Storage: -20° to 85°C
Humidity: Up to 95% non-condensing
Dimensions
6.38” x 5.51” x 1.00” (162mm x 140mm x 25mm)
Weight
1.5lbs (0.68kg)
Compliance
Regulatory: FCC, CE, RoHS
Flammability: 94V0
Warranty
3 years
Order Information
500880-TX KVM HDMI over IP PoE Extender TX, 4K/60
(UPC: 627699908006)
500880-RX KVM HDMI over IP PoE Extender RX, 4K/60
(UPC: 627699808009)
Accessories
(These items are sold
separately)
500917 Wall Mount Transceiver Bracket Kit
500993 Univ. Locking Power Supply 5VDC/2.6A US/UK/EU Blade
KVM HDMI over IP PoE Extender, 4K@60
500800
Quick Installation Guide
Overview
The KVM HDMI over IP PoE Extender, 4K@60 allows HDMI & USB equipment to be connected
up to 330ft (100m) over an Ethernet LAN, supports HDMI up to 4K @ 60Hz (4:4:4) via Cat5e/6
cable in multiple point-to-point and point-to-multipoint configurations. The Transmitter (500800-
TX) and Receiver (500800-RX) support PoE (PD) if used with a PoE (PSE) Ethernet Switch.
The Transmitter terminates via HDMI, Audio In/Out and USB ports to a computer
server/workstation. The Receiver terminates via HDMI, Audio In/Out, and USB ports to a display,
mic & amplified speakers (or headset with mic) respectively, and up to 4 USB devices such as a
keyboard, mouse, printer, drawing pad, storage device, camera, etc. A single Receiver can be
switched via hotkey sequences to any Transmitter on the network, allowing a single operator to
manage numerous servers/workstations, in a distributed KVM application.
For multiple point-to-point (including point-to-multipoint) configurations the Ethernet Switch must
support Gigabit ports, Jumbo Frame capability and DHCP Server capability. MuxLab recommends
using the Cisco CBS350 Series Managed Switches.
The MuxLab ProDigital Network Controller (500812) is available to simplify the configuration and
utilization of the 500800 and other MuxLab IP based products via an Ethernet web interface.
Applications
Applications include management of multi-server systems supporting HDMI displays in IT
Departments within corporations, Educational Institutions, CAD Design, Graphic Design, Media
Servers, and Data Centers.
Installation
1.
Identify the connectors on the Transmitter and Receiver as indicated on the product labels, see the
above front and rear product views for further details.
2.
Verify that the distance between the HDMI Transmitter and Receiver is within MuxLab
specifications (see Specifications table for more details).
3.
To install the Transmitter:
3a.
Connect the Transmitter to the computer server/workstation HDMI video source with an
HDMI compliant cable.
3b.
Connect the Transmitter USB Port to the computer server/workstation USB port, using a
compliant Type A to Type B USB Cable.
