© MuxLab Inc. 94-000859-A SE-000859-A
8495 Dalton Road, Mount Royal, Quebec, Canada. H4T 1V5
Tel: (514) 905-0588 Fax: (514) 905-0589
Toll Free (North America): (877) 689-5228
E-mail: [email protected] URL: www.muxlab.com
Specifications
Specifications
Environment
Quad single-channel balanced analog audio and Dante audio.
Devices
Analog audio equipment and Dante professional audio equipment.
Connectors
Two (2) 6-pin phoenix connector, for Quad single-channel balanced analog audio-in.
Two (2) 6-pin phoenix connector, for Quad single-channel balanced analog audio-out.
One (1) RJ45S for Cat 5e/6 unshielded or shielded twisted pair, for Ethernet connection.
One (1) 2.1mm jack, for power.
Maximum Distance
1) Network connection: Use Cat5e/6 at 330ft (100m) from Ethernet Switch.
2) Balanced 2CH analog audio connection using a MuxLab 500028 Stereo HiFi Balun:
Use Cat5e/6 at 3250ft (1km) from 500028 Stereo HiFi Balun.
3) Balanced and Unbalanced connections directly connected to analog audio
equipment: See analog audio equipment for maximum distance specifications.
Note: When installed in an electrically noisy environment, an STP cable must be used. Also,
cross-connection reduces the effective distance depending on the grade of twisted cable used.
Signal Protocal/Standard
Dante
Bandwidth
Analog: 20Hz to 20KHz, Network: TBD.
RJ45 Pin Configuration
Reverse Polarity Sensitive.
Use EIA/TIA 568A or 586B
straight-through wiring.
RJ45 Link
Pin 1 (R)
Pin 2 (T)
Pin 3 (R)
Pin 6 (T)
Pin 4 (R)
Pin 5 (T)
Pin 7 (R)
Pin 8 (T)
Cables
Note: Cables not included.
One (1) Cat 5e/6 or better twisted pair cables required.
Eight (8) Quad single-channel balanced audio cables with 3-pin phoenix connectors (for
audio-in and audio-out).
Power Source
This device supports PoE (PD), an external power supply is not included. It is intended to
be powered via a PoE (PSE) Ethernet Switch. If required, an optional power supply may
be purchased separately.
PoE
IEEE 802.3af
Power Consumption
4.5W
Temperature
Operating: 0° to 40°C
Storage: -20° to 85°C
Humidity: Up to 95% non-condensing
Dimensions
4.4” x 4.6” x 1.0” (111mm x 120mm x 25mm)
Weight
1.5lbs (0.7kg)
Compliance
Regulatory: FCC, CE, RoHS
Flammability: 94V0
Warranty
2 years
Order Information
500765
Dante/Quad Channel Audio PoE Gateway
Accessories
500920 16-Port Rackmount Transceiver Chassis
500917 Wall Mount Transceiver Bracket Kit
500989 Univ. Power Supply 12VDC/1.25A LOCK US/UK/EU
Dante/Quad Channel Audio PoE Gateway (500765)
Quick Installation Guide
Overview
The Dante/Quad Channel Audio PoE Gateway permits non-Dante compatible analog audio
equipment to interface with Dante compatible professional audio equipment, and may be managed
by the Audinate Dante Controller software.
The unit allows Dual two-channel or Quad single-channel full range (20Hz to 20KHz) balanced
analog audio signals to be transmitted over the network to Dante compatible professional audio
equipment. Dual two-channel or Quad single-channel balanced analog audio signals may also be
received from Dante compatible equipment in the same manner. The unit may be connected via
Cat5e/6 cable up to 330ft (100m) from an Ethernet Switch.
The Dante/Quad Channel Audio PoE Gateway includes four single-channel balanced analog audio-
in and four single-channel balanced analog audio-out ports, via phoenix connectors. The Quad
single-channel balanced analog audio-in ports may be connected to line level balanced analog
audio signals or to line level balanced microphones. The Quad single-channel balanced analog
audio-out ports may be connected to balanced analog audio amplifiers supporting line level inputs,
such as the MuxLab 500217 Audio Zone Amplifier 100W, or to two pairs of powered speakers for
direct sound output.
The device supports PoE (PD) and may be powered by a PoE (PSE) Ethernet Switch.
Applications
Interfacing networked Dante digital audio equipment with 2CH analog audio equipment in
professional and commercial audio applications over long distances.
Installation
1.
Identify the connectors on the Dante/Quad Channel Audio PoE Gateway unit as indicated on
the product labels, see the above front and rear product views for further details.
