© MuxLab Inc.
94-000816-A
8495 Dalton Road, Mount Royal, Quebec, Canada. H4T 1V5
Tel: (514) 905-0588 Fax: (514) 905-0589
Toll Free (North America): (877) 689-5228
E-mail: [email protected] URL: www.muxlab.com
Specifications
Environment
HDMI (up to 1080p @ 30Hz)
Devices
DVD, plasma, projectors, monitors, TV, PC, laptops, servers supporting HDMI.
Control
Controllable via the Ethernet port.
HDMI standard
HDMI ver. 1.3, HDCP 1.1
Connectors
Note: Cables not included.
One (1) HDMI receptacle.
One (1) RJ45S for Cat 5e/6 unshielded or shielded twisted pair.
One (1) 3.5mm jack for IR emitter/sensor.
One (1) DB9 Serial Port for RS232.
Six (6) DIP Switches for device ID addressing.
Maximum Distance
On HDMI (per side): 6.6ft (2m)
On Cat5e/6: 330ft (100m)
Latency
Less than 500ms
Compression
Video: H.264 fully compliant with ISO/IEC 14496-10 high profile and level
4.1, up to 1920x1080p @ 30Hz
Audio: MPEG
Network Requirement
Compliant with the full IEEE 802.3-2002 specifications (100BaseTX).
Network Bandwidth
Video: 18Mbps, Audio: 256Kbps
IR Frequency
38KHz to 56KHz
RJ45 Pin Configuration
Use EIA/TIA 568A or 586B
straight-through wiring.
RJ45 Link
Pin 1 (R)
Pin 2 (T)
Pin 3 (R)
Pin 6 (T)
Pin 4 (R)
Pin 5 (T)
Pin 7 (R)
Pin 8 (T)
Power Source
This device supports PoE (PD), an external power supply is not included. It is
intended to be powered via a PoE (PSE) Ethernet Switch. If required, an optional
power supply (500993) may be purchased separately.
PoE Standard
IEEE 802.3af
Power Consumption
Transmitter: 4.5W
Receiver: 2.5W
Temperature
Operating: 0° to 40°C
Storage: -20° to 85°C
Humidity: Up to 95% non-condensing
Enclosure Type
Metal enclosure.
Dimensions
4.4” x 4.6” x 1.0” (111mm x 120mm x 25mm)
Weight
1.5lbs (0.7kg)
Compliance
Regulatory: FCC, CE, RoHS
Flammability: 94V0
Warranty
2 years
Order Information
500757
HDMI over IP H.264 PoE Extender Kit
500757-TX HDMI over IP H.264 PoE Extender TX
500757-RX HDMI over IP H.264 PoE Extender RX
Accessories
(These items are sold
separately)
500920 Rackmount Transceiver Chassis 16-Port
500917 Wall Mount Transceiver Bracket Kit
500998 IR Emitter, and 500994 IR Sensor
500993 Univ. Locking Power Supply 5VDC/2.6A US/UK/EU Blade
HDMI over IP H.264 PoE Extender Kit
500757
Quick Installation Guide
Overview
The HDMI over IP H.264 PoE Extender Kit allows HDMI equipment to be connected up to 330ft.
(100m) @ 1080p via one (1) Cat5e/6 unshielded twisted pair cable in a point-to-point
configuration. Point-to-multipoint and multipoint-to-multipoint is possible by connecting several
Transmitters and Receivers to the same local Ethernet network. The Transmitter (500757-TX) and
Receiver (500757-RX) may be sold separately, and support PoE (PD) if used with a PoE (PSE)
Ethernet Switch. The kit comes with one (1) Transmitter and one (1) Receiver. IR Emitter and IR
Sensor, if required, may be purchased separately for IR based remote control applications.
For the point-to-multipoint and multipoint-to-multipoint configurations the Ethernet Switch must
have Gigabit ports, DHCP Server capability and additionally support the IGMP communication
protocol for the multipoint-to-multipoint case. MuxLab recommends using the Cisco SG300 Series
Managed Switches.
The MuxLab ProDigital Network Controller (500811) is available to simplify the configuration and
utilization of the 500757 and other MuxLab IP based products via an Ethernet web interface.
Applications
Applications include commercial and residential AV systems, classroom projector systems, digital
signage, boardroom systems, collaborative PC systems, and medical information systems.
