© MuxLab Inc.
94-000861-A SE-000861-A
2321 Cohen St, Saint-Laurent, QC Canada H4R 2N7.
Tel: (514) 905-0588 Fax: (514) 905-0589
Toll Free (North America): (877) 689-5228
E-mail:
Specifications
Environment
HDMI 2.0b
Devices
DVDs, Blu-ray players, projectors, monitors, TVs, PCs,
laptops, servers supporting HDMI.
Transmission
Transparent to the user
Bandwidth
340 MHz
Signals
HDMI 2.0b protocol
Connectors
Cables not included.
One (1) HDMI receptacle.
One (1) RJ45S for Cat5e/6 unshielded or shielded twisted
pair.
One (1) DB9 connector for RS232.
One (1) TosLink Optical Connector for Audio Return.
Two (2) 3.5mm sockets for IR Sensor & Emitter (carrier-wave).
One (1) 2.1mm locking power connector.
Maximum Distance
Based on a maximum
length of 6.6 ft (2 m)
of HDMI cable per
end.
4K/30 (4:4:4):
Cat 5e/6: 131ft (40m)
4K/60 (4:2:0):
Cat 5e/6: 131ft (40m)
1080p/60:
Cat 5e/6: 230ft (70m)
When installed in an electrically noisy environment, STP
cable must be used. Also, cross-connection reduces the
effective distance depending on the grade of twisted cable
used.
RJ45 Pin
Configuration
Reverse Polarity
Sensitive. Use
EIA/TIA 568A or 586B
straight-through
wiring.
RJ45 Link
Pin 1 (R) Pin 2 (T)
Pin 3 (R) Pin 6 (T)
Pin 4 (R) Pin 5 (T)
Pin 7 (R) Pin 8 (T)
Cable
One (1) Category 5e or better twisted pair cable required.
Power Supply
Two (2) 110-240V/5VDC power supplies with interchangeable
blades
Power Consumption
Transmitter: 1.6 Watt Receiver: 3.2 Watt
Temperature
Operating: 0° to 40°C Storage: -20° to 85°C Humidity: Up to
95% non-condensing
Enclosure
Metal
Dimensions
4.40” x 3.00” x 1.00” (11.2 x 7.6 x 2.5 cm)
Weight
1.4 lb (0.6 kg)
Compliance
Regulatory: FCC, CE, RoHS
Warranty
2 years
Order Information
500458-ARC HDMI/RS232 Extender Kit with ARC, HDBT,
UHD-4K
Accessories
500905 Rackmount Transceiver Chassis 3 Port
500920 Rackmount Transceiver Chassis 16 Port
HDMI/RS232 Extender Kit with ARC, HDBT,
UHD-4K (500458-ARC)
Quick Installation Guide
______________________________________________________________________
Overview
The HDMI/RS232 Extender Kit with ARC, HDBT, UHD-4K (500458-ARC) allows
HDMI equipment to be connected up to 131ft (40m) at 4K/30 (4:4:4) and 4K/60 (4:2:0)
resolution, or 230ft (70m) at resolutions up to 1080p via one (1) Cat 5e/6 unshielded
twisted pair cable in a point-to-point configuration. The kit supports Audio Return
Channel (ARC), allowing the Receiver to return audio from a sink device such as a
smart TV back to the Transmitter and on to an audio system. The originating ARC
signal may be received via the HDMI (ARC) or TosLink-in port of the 500458-ARC-
RX and transmitted via the TosLink-out port of the 500458-ARC-TX. The kit includes
one (1) transmitter, one (1) receiver, one (1) IR Emitter, one (1) IR sensor, and two (2)
power supplies.
Applications
Applications include digital signage, commercial and residential AV systems, classroom
projector systems, boardroom systems, collaborative PC systems, and medical
information systems.
Installation
1.
Identify the connectors on the Transmitter and Receiver as indicated on the product
end panels.
2.
Verify that the distance between the HDMI Transmitter and Receiver is within
MuxLab specifications (see specifications table).
3.
To install the Transmitter:
3a.
Connect the Transmitter to the HDMI video source with an HDMI compliant
cable.
3b.
Connect the Transmitter Audio Out to the audio equipment using a compliant
optical audio cable.
3c.
Connect one (1) length of Cat 5e/6 (or higher) grade UTP cable to the
RJ45 LINK connector on the Transmitter.
