© MuxLab Inc.
94-000858-A SE-000858-A
8495 Dalton Road, Mount Royal, Quebec, Canada. H4T 1V5
Tel: (514) 905-0588 Fax: (514) 905-0589
Toll Free (North America): (877) 689-5228
E-mail: [email protected] URL: www.muxlab.com
Specifications
Environment
HDMI 1.3a (Supports the 3D feature of HDMI 1.4).
Devices
DVD, plasma, projectors, monitors, TV, PC, laptops, servers
supporting HDMI.
Transmission
Transparent to the user.
Bandwidth
340 MHz.
Signals
HDMI 1.3a protocol.
Connectors
Cables not included.
One (1) HDMI receptacle.
One (1) RJ45S for Cat 5e/6 unshielded or shielded twisted pair.
Two (2) 3.5mm jacks for IR emitter and sensor.
One (1) DB9 Connector for RS-232.
Maximum Distance
Based on a maximum
length of 6.6 ft (2 m) of
HDMI cable per end.
Cat 5e/6: 230 ft (70 m) up to 1080P Deep Color
115 ft (35 m) for 4K; 3840 X 2160/24,25,30 Hz
Note: When installed in an electrically noisy environment, an STP
cable must be used. Also, cross-connection reduces the effective
distance depending on the grade of twisted cable used.
RJ45 Pin
Configuration
Reverse Polarity
Sensitive. Use EIA/TIA
568A or 586B straight-
through wiring.
RJ45 Link
Pin 1 (R) Pin 2 (T)
Pin 3 (R) Pin 6 (T)
Pin 4 (R) Pin 5 (T)
Pin 7 (R) Pin 8 (T)
Cable
One (1) Cat 5e/6 or better twisted pair cable required
Power Supply
One (1) 110-240V/48VDC power supply with interchangeable blades.
Power Consumption
Transmitter: 1.6 Watt
Receiver: 3.2 Watt
Temperature
Operating: 0° to 40°C
Storage: -20° to 85°C
Humidity: Up to 95% non-condensing
Enclosure
Metal
Dimensions
4.40” x 3.00” x 1.00” (11.2 x 7.6 x 2.5 cm)
Weight
1.4 lb (0.6 kg)
Compliance
Regulatory: FCC, CE, RoHS
Flammability: 94V0
Warranty
2 years
Order Information
500454-POE HDMI/RS232 Extender Kit, POE, HDBT, UHD-4K
500454-POE-RX HDMI/RS232 Receiver, PoE, HDBT, UHD-4K
HDMI/RS232 Extender Kit, PoE, HDBT, UHD-4K
500454-POE
(Kit)
,
500454-POE-RX
(Receiver only)
Quick Installation Guide
Overview
The HDMI/RS232 Extender Kit, PoE, HDBT, UHD-4K (500454-POE) allows HDMI
equipment to be connected up to 230 ft (70 m) @ 1080p via one (1) Cat 5e/6 unshielded
twisted pair cable in a point-to-point configuration. The 500454-PoE includes one (1)
Transmitter and one (1) Receiver as well as an IR Emitter (500998) and IR Sensor
(500999) for remote control applications. The unit comes with one (1) power supply, as
it only require power on the Transmitter or Receiver side and provides PoE/PoC power
to the opposite end extender. The 500454-POE-RX receivers may be used in
conjunction with MuxLab’s HDMI Matrix Switch. For installation instructions, please
refer to the HDMI Matrix Switch Installation Guide.
Applications
Applications include digital signage, commercial and residential AV systems, classroom
projector systems, boardroom systems, collaborative PC systems, and medical
information systems.
Installation
1.
Identify the connectors on the Transmitter and Receiver as indicated on the product
end panels.
2.
Verify that the distance between the HDMI Transmitter and Receiver is within
MuxLab specifications (see specifications table).
3.
To install the Transmitter:
3a.
Connect the Transmitter to the HDMI video source with an HDMI compliant
cable.
3b.
Connect one (1) length of Cat 5e/6 (or higher) grade UTP cable to the
RJ45 LINK connector on the Transmitter.
4.
To install the Receiver:
4a.
Connect the Receiver to the HDMI display equipment with an HDMI compliant
cable.
