© MuxLab Inc .
Passive CCTV Power Integrator Hub Installation
Guide
Page 20
Picture
Probable Causes Possible Solutions
Picture loses
color, faded or
weak
Split pair
Check if the UTP pairs are split
and correct. Each signal pair
must be twisted.
Lower grade
UTP cable is
introducing high
signal losses.
Use signal repeater for extended
distance or replace cable by
higher grade.
No power or
intermittent power
at camera
Wrong pin
configuration.
Check wiring.
Distance
exceeded
Verify distance specifications for
remote power. Move power
closer to camera.
PTZ controls not
responding
Wrong pin
configuration
Check wiring.
When contacting your nearest MuxLab dealer or MuxLab
Technical Support please have the following information ready:
Unit model number.
Cabling layout. Include model of camera and DVR used,
power supply voltage, camera wattage, cable length and type.
Description of problem.
List of tests performed.
