3G-SDI ST2110 Over IP Gateway Converter
Operation Manual
© MuxLab Inc. 2022
7
•
Supports SMPTE ST-2110 uncompressed SDI video up to 1080@ 60Hz
•
Supports SMPTE ST-2022-7 (Class D, supporting up to 150usec delay
with no frame lose) AV signal Redundancy (Seamless Protection
Switching)
•
Extend SDI audio/video over an IP network at up to 100ft (30m) over
CAT 6a/7 UTP cable (for 500767-2110-UTP model), or 1300ft (400m)
over duplex OM4 fiber (for 500767-2110-MM model) - Note that OM3
fiber may also be used at up to 985ft (300m) on the MM Fiber model.
•
This device is a Transceiver and can be configured as a Transmitter
(Encoder), or Receiver (Decoder)
•
Supports many Transmitters and Receivers depending on network
bandwidth
•
Supports point-to-point, point-to-multipoint and multipoint-to-multipoint
applications
•
Supports two (2) 10G Ethernet ports (labelled as: Media 1 & Media 2)
for AV Media/Data transmission, and a 1G Ethernet port (labelled as:
Console LAN) for device management & control via a RestAPI or NMOS
based management platform
•
RS232 port in included for future use, to manage end devices
•
Audio 3.5mm port is included for future use, for audio insert/extract
•
May be managed via a Web interface and third-party control software
platforms supporting a RestAPI or NMOS
1.4
Specifications
The following are the 500767-2110 specifications.
Environment
Up to 3G-SDI
Devices
Cameras, mixers, media players, monitors, TVs, PCs, laptops, servers
supporting up to 3G-SDI
Signals
Up to 3G-SDI (1080p @ 60Hz), supporting ST-2110
Connectors/Switches
Two (2) BNC connectors for SDI
Two (2) SFP Connectors for 10G Ethernet ports for redundant AV
transmission
One (1) RJ45S Connector for 1G Ethernet port for unit control
One (1) 3-position Phoenix Connector for RS232 (for future use)
One (1) 3.5mm audio connector (for future use)
One (1) 2.1mm locking power connector
Max Distance
OM4: 1300ft (400m), for model 500767-2110-MM
OM3: 985ft (300m), for model 500767-2110-MM
