Bluetooth Connection
USER MANUAL AND WARRANTY
Design, logo and wordmark are intellectual properties of Butani Group Limited.
WARRANTY CARD
Caution
Changes or modifications not expressly approved by the party responsible for the
compliance could void the user’s (or your) authority to operate the equipment.
Avoid storage in extreme heat or cold. Avoid extreme temperatures and high
humidity. The product’s working temperature range is 0°C to 50°C (32°F to 122°F).
FCC Statement
Device with Bluetooth 4.2 wireless technology equipped computers, smartphones
and MP3 players.
To use Bluetooth for your audio connection, first pair the BOX (device name
‘MUVEACOUSTICS: BOX’) with your audio source (music player, smartphone,
laptop or other Bluetooth equipped device that can act as audio source). Make
sure BOX is fully charged and turn it on by sliding the On/Off switch at the back
of the speaker to “ON”. Once the power is turned on, the BOX is in Bluetooth
mode if there is no USB flash drive or micro SD/TF card inserted. You can hear a
voice notification – “Bluetooth mode” and the blue LED is blinking quickly. Make
sure Bluetooth is enabled on your audio source, search for available devices and
in a few moments ”MUVEACOUSTICS: BOX” will appear on your list of possible
Bluetooth connections. Press “pair” or “connect” on your device and after the
connection is made, the blue LED will stop blinking and you can hear
“connected”. Then your device is paired.
From now on, when you turn on BOX to Bluetooth mode, it will automatically
search for the last Bluetooth device it was paired with.
If you want to cancel the connection, just press and hold the “M” button for 3
seconds and you can hear “disconnected”.
While there is no pairing with Bluetooth device within 10 minutes, BOX will turn
off automatically and you need to switch off and switch on again for further use.
Designed by:
www.muveacoustics.com
Imported and distributed
by Zeeva Electronics Private Limited.
All rights reserved.
901-902,Trade World C wing
Kamla Mill Compound
Senapati Bapat Marg, Lower Parel West
Mumbai-400013
The input voltage to the product is 5V 1A.
In order to charge the product in safe manner and reliable conditions, please
only adopt certified appropriate charger / adapter for charging the product.
Only charge the product at ambient temperatures between 10 deg °C / 50 deg °F
and 40 deg °C / 104 deg °F.
Do not heat above 70 deg °C / 158 deg °F, eg. Do not expose to sunlight or throw
into fire.
Switch off the product after use.
Please note that we won’t take any responsibility for any wrong operation (eg.
Voltage higher than 5V) as this may result in severe injury or loss of property, and we
cannot control the operating process during the time the user using this product.
In extreme cases, abuse or misuse of Lithium battery pack can lead to explosion,
heat generation, fire development or smoke development.
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
NOTE: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
-
-
-
-
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
MUVEACOUSTICS
®
ONE-YEAR LIMITED WARRANTY
MUVEACOUSTICS
®
BOX speaker have been subjected to a thorough series of
tests to ensure the highest level of dependability. It is unlikely that you will
experience any problem, but if a defect should become apparent during the use
of this product, MUVEACOUSTICS
®
warrants to the original purchaser that this
product will be free from defects in material and workmanship for a period of 12
months from the date of your original purchase from an authorized dealer. If a
defect covered by this warranty occurs, MUVEACOUSTICS
®
, at its option, will repair
or replace the product purchase at no repair charge (postage charges will apply).
If a replacement is necessary and your product is no longer available, a comparable
product may be substituted at the sole discretion of MUVEACOUSTICS
®
.
This warranty does not cover normal wear and tear, abusive use or misuse,
modification, tampering or by any other cause not related to either materials or
workmanship. This warranty does not apply to product used for any industrial,
professional or commercial purposes.
For service on any defective under 12 months warranty policy, please contact
Consumer Support.
Email: [email protected]
Telephone Number: 022-67368877
Keep all relevant information for future reference
This device has been tested and complies with part 15 of the FCC rules.
FCC ID: 2ANVW-MA-2005
