Bluetooth Connection
Devices with Bluetooth 2.0 wireless technology or above, such as
Bluetooth wireless technology equipped computers, smartphones
and MP3 players.
To use Bluetooth for your audio connection first pair A+ with your
audio source (music player, smartphone, laptop, or other Bluetooth
equipped device that can act as audio source). First press and hold
the Power button for three seconds or until your hear the tone to turn
the power on. Once the power turns on the A+ is in pairing mode. The
blue Sync LED will blink slowly and then flash quickly. Make sure
Bluetooth is enabled on your audio source and in a few moments
“Muve Acoustics: A+” will appear on your list of possible Bluetooth
connections. Press “pair” or “connect” on your device and when the
connection is made, the blue led will stop to blink and you can hear
1 sec. flat tone.
You are paired.
From now on, when you turn on A+ , it will automatically search for
the last Bluetooth device it was paired with.
Wired Connection
A+ has a standard 3.5mm audio in jack. If there is no Bluetooth source
available or if you simply prefer a wired connection, you can connect
your A+ directly to your audio source using a stereo male 3.5mm
connection on both ends of the cable.
(This cable is included in the packaging box)
Caution
Changes or modifications not expressly approved by the party
responsible for the compliance could void the user’s (or your)
authority to operate the equipment. Avoid storage in extreme heat or
cold. Avoid extreme temperatures and high humidity. The product’s
working temperature range is -35°C to 60°C (-31°F to 140°F).
USER MANUAL AND WARRANTY
MUVEACOUSTICS
TM
ONE-YEAR LIMITED WARRANTY
MUVEACOUSTICS
TM
A+ speaker have been subjected to a thorough
series of tests to ensure the highest level of dependability. It is unlikely
that you will experience any problem, but if a defect should become
apparent during the use of this product, MUVEACOUSTICS
TM
warrants to the original purchaser that this product will be free from
defects in material and workmanship for a period of 12 months from
the date of your original purchase from an authorized dealer. If a
defect covered by this warranty occurs, MUVEACOUSTICS
TM
, at its
option, will repair or replace the product purchase at no repair
charge (postage charges will apply).
If a replacement is necessary and your product is no longer available,
a comparable product may be substituted at the sole discretion of
MUVEACOUSTICS
TM
.
This warranty does not cover normal wear and tear, abusive use or
misuse, modification, tampering or by any other cause not related to
either materials or workmanship. This warranty does not apply to
product used for any industrial, professional or commercial purposes.
For service on any defective under 12 months warranty policy, please
contact Consumer Support.
The input voltage to the product is 5V 0.5A.
In order to charge the product in safe manner and reliable conditions, please
only adopt certified appropriate charger / adapter for charging the product.
Only charge the product at ambient temperatures between 10 deg °C / 50 deg °F
and 40 deg °C / 104 deg °F.
Do not heat above 70 deg °C / 158 deg °F, eg. Do not expose to sunlight or throw
into fire.
Switch off the product after use.
Please note that we won’t take any responsibility for any wrong operation (eg.
Voltage higher than 5V) as this may result in severe injury or loss of property, and we
cannot control the operating process during the time the user using this product.
In extreme cases, abuse or misuse of Lithium battery pack can lead to explosion,
heat generation, fire development or smoke development.
Designed by:
www.muveacoustics.com
Imported and distributed in India
by Zeeva Electronics Private Limited.
All rights reserved.
901-902,Trade World C wing
Kamla Mill Compound
Senapati Bapat Marg, Lower Parel West
Mumbai-400013
Design, logo and wordmark are intellectual properties of Butani Group Limited.
Keep all relevant information for future reference
Email: [email protected]
Telephone Number: 022-67368877
