MUTOH XPJ-661UF Скачать руководство пользователя

Страница: 33 / 174

Loading media

Important!

•

When loading a new media, make sure to place it on an appropriate position and input correct media information.

If wrong information is entered, the printer can print on an unintended position of the table. Once UV ink stains on the table,

it will be cured by UV lamp and will not be removed from the table.

• When using this product, do not place any object in the sensing area of the obstacle detection sensor. This will cause false

detection and the printer will not be able to print correctly.

For details, see the following section:

Printing area

" P. 32

Placing the media on the table

[1]

Check that the message on the left is displayed.
If not displayed, tap

[2]

Hold the handle on the front cover to gently open it.

The message on the left will appear.

Note

When using the optional vacuum table, you can change the vacuum power of

the current job by tapping

while the message on the left appears

on the panel. The vacuum power can be selected between 0 and 4 (0: turn the

vacuum fan off ).

The vacuum fan turns on by tapping

The change made will be saved in the user type currently selected.

Set media, then

Tap [∧] key.





Set media, then

close cover.

Содержание XPJ-661UF















































































































































































Результаты поиска

Содержание XPJ-661UF

Отзывы:

Похожие инструкции для XPJ-661UF

Бренды по названию

Популярные бренды

MUTOH XPJ-661UF, Руководство по эксплуатации

Результаты поиска

Содержание XPJ-661UF

Отзывы:

Похожие инструкции для XPJ-661UF

Бренды по названию

Популярные бренды