MUTOH XPJ-661UF Скачать руководство пользователя

Страница: 117 / 174

Preparing for Daily Maintenance 117

Preparing for Daily Maintenance

Required Items

[1]

Prepare the following items to perform daily maintenance.

Important!

• Use a paper towel supplied with the printer or optional polyester knit wiper. DO NOT use a tissue.

Lints or flakes on tissue may cause damage to the print head.

• DO NOT use non-dedicated maintenance cleaner.

• If you want to purchase the optional maintenance cleaner, contact your local Mutoh dealer or nearest Mutoh sales office.

[2]

• Wear the polyethylene gloves (white) over the plastic gloves (pink).

• Wear personal protective equipment such as goggles, protective mask or

clothing.

Skin or eye contact with UV curable ink may cause skin inflammation or allergic reaction.

When using this product, wear personal protective equipment (supplied gloves or solvent-resistant

gloves, goggles or protective eyewear, protective mask, protective clothing) to avoid skin contact

with ink.

Cleaning stick

Dedicated maintenance

cleaner

Dropper

Plastic cup

Paper towel

or Polyester knit wiper

Polyethylene gloves

Protective goggles

Tray

Rubber gloves

Scraper

Protective mask

Protective clothing

CAUTION

Содержание XPJ-661UF















































































































































































Результаты поиска

Содержание XPJ-661UF

Отзывы:

Похожие инструкции для XPJ-661UF

Бренды по названию

Популярные бренды

MUTOH XPJ-661UF, Руководство по эксплуатации

Результаты поиска

Содержание XPJ-661UF

Отзывы:

Похожие инструкции для XPJ-661UF

Бренды по названию

Популярные бренды