MUTOH XpertJet XPJ-1641SR, Руководство для стартапов

Страница: 2 / 48

2 Site Preparation
1 Site Preparation
Choose the location which satisfies the requirements below.
• The floor must be level.
• Avoid vibration from the neighboring devices.
• Low humidity and free from dust.
• Less chance of temperature and humidity changes.
• Avoid direct sunlight.
• Avoid water.
• Avoid direct air onto the printer.
• Low levels of electromagnetic waves.
The following space is required for installation.
Installation Location Requirements
• Choose the floor that can safely support the weight of this product.
The total weight of printer and stand is 280 kg.
If the floor does not have sufficient load capacity, it can lead to injury from a fall.
• This equipment is not suitable for use in locations where children are likely to be present.
• Keep the work area well ventilated while operating.
Ink odor may cause health problem such as headache, dizziness, or dull. If you experience these symptoms,
stop printer operation and move to fresh air. Seek medical attention if vomit persists.
Minimum Space Requirements
Site Preparation
Connecting Power
and Network
Printer Initial
Setup
Viewing
Operation Manual
Safety
Precautions
Unpacking
Assembling
Test printing
Installing MSM
Site Preparation
CAUTION
4,400 mm
2,895 mm
1,000 mm 650 mm
1,000 mm
1,000 mm
Rear
Front
Width x Depth:2,750 mm x 895 mm
Height :1,611 mm *1
Printer Size
*1 When installing ink bag cases.
The room height should be at least
1,760 mm.