MUTOH VJ-626UF, Руководство по эксплуатации

Страница: 31 / 144

Printing area 31
1 Printing
• When loading new media, you need to enter the media size (height, width and length), media set position and origin
position (print start position) from the operation panel.
• Minimum margins from media set position to the origin position are 5 mm x 5 mm.
• The guide line indicates the maximum media size (483 x 594 mm).
• Use the screw hole (M4) to attach your own jig.
• Printing is always started from origin position (print start point).
See the figure below as example.
Printing area
Important!
When using this printer, DO NOT place any objects around obstacle detection area.
Otherwise, it will cause false detection of the obstacle sensor and the printer may not be able to print correctly.
Printing
ABC
DEF
GHI
JKL
Y-direction
X
-dir
ec
tion
Origin position(X, Y)
Media set position(X, Y)
Screw hole
(M4)
(Printer Front side)
Guide line
Media
Table
Media height
Media width
Media length
Obstacle sensor
Obstacle detection area