MUTOH VJ-1638WX, Руководство по эксплуатации

Страница: 139 / 380

VJ-2638X/1938X/1638X/1938WX/1638WX OPERATION MANUAL Before using
Print quality adjustment 139
3.6 Print quality adjustment
It is used for optimizing the quality of image prints.
Adjustment methods for this printer are as follows.
NOTE
• When newly setting or changing the user type setting after adjusting Standard adjust print, make
sure to adjust print.
• When changing the print mode after performing standard head alignment, make sure you adjust
print head.
• Since all print modes are adjusted at once after performing Custom adjust print, adjust print is not
required even after changing the print mode.
• When specifying a print mode for RIP software, etc, that is different from the mode set in the
usertype setting, perform Custom head adjustment and check all patterns (A to F), and then adjust
any patterns that are misaligned beforehand.
• Print quality may improve by head alignment in the following situations:
For adjustment procedure, see 3.5.6 Head alignment
• Print quality is poor when using the uni-direction print mode.
Details of print mode
• Print quality does not improve even after performing print quality adjustment
• After you have performed head alignment, make sure you perform print quality adjustment.
There may be misalignment caused by head alignment.
Adjustment
method
Description Reference
Standard Adjustment is performed only for the print mode set by the
current User Type.
3.6.1 Standard print quality
adjustment
Custom Adjustment is performed for all print modes that can be set by
the current User Type.
3.6.2 Custom print quality
adjustment