MUTOH VJ-1304 Скачать руководство пользователя страница 60

Страница: 60 / 114

4 Daily maintenance

VJ-1304 QUICK REFERENCE

4-2

4.1

Replacing consumable components

This sub-section describes when to replace the ink cartridges.

4.1.1

Replacing ink cartridges

This sub-section describes when to replace the ink cartridges.

(1) Replacement time

a. When "[****] InkNearEnd" is displayed on the operation panel

•

This message is displayed when there is a small amount of ink remaining in the ink cartridge.

•

The alarm buzzer sounds.
To stop the buzzer, press the [Enter] key on the operation panel.

•

Replace with the new ink cartridge.

b. When "[****] InkEnd" is displayed on the operation panel

•

This message is displayed when there is no ink remaining in the ink cartridge.

•

The alarm buzzer sounds.
To stop the buzzer, press the [Enter] key on the operation panel.

•

Immediately replace it with the new ink cartridge.

NOTE

• [****] in the messages of ink cartridge replacement indicates the color that is almost empty or runs

out, using the following characters.

• K: Black

• C: Cyan

• M: Magenta

• Y: Yellow

• Do not insert or remove the ink cartridge except at the time of replacement.

Inserting or removing the ink cartridge mixes air into the ink tube, and failures such as nozzle
detachment may occur.

• If "Ink End" is displayed, you cannot print until inserting the new ink cartridge.

• If there is no cartridge for replacement at hand, leave the empty ink cartridge inserted in the printer.

Leaving the printer with the ink cartridge removed may result in a clogging head.

Содержание VJ-1304



















































































































Результаты поиска

Содержание VJ-1304

Отзывы:

Похожие инструкции для VJ-1304

Бренды по названию

Популярные бренды

MUTOH VJ-1304, Быстрая справка

Результаты поиска

Содержание VJ-1304

Отзывы:

Похожие инструкции для VJ-1304

Бренды по названию

Популярные бренды