MUTOH ValueJet VJ1324X Скачать руководство пользователя страница 181

Страница: 181 / 264

VJ-1324X OPERATION MANUAL

Panel setup menu

5.2 Test Print Menu

181

5.2

Test Print Menu

Performs nozzle check of the print head and setup list.

TIP

•Refer to the following for the operation procedure of test print.

3.5 Test print

Setup item

Description

Nozzle Check

Perform the nozzle check printing.
It is used to check whether there are any clogged heads, or missing or blurred prints.

3.5.1 Nozzle check

Mode Print

Mode print can be performed.
Used to confirm the following printing conditions.

• Print quality

• Effect

• Pre-heater temperature

• Platen heater temperature

• Dryer temperature

• Adjustment value

3.5.2 Mode print

Setup List

Setup list printing is performed.
Used to check the setup item and the user type.

3.5.3 Setup print

Palette

Palette print is executed for the color demonstration.

3.5.4 Palette print

—

• [Enter] key: “Printing” is displayed on the operation panel and test printing starts.

• [Cancel] key: shifts to the previous menu.

Panel setup menu

Содержание ValueJet VJ1324X









































































































































































































































































Результаты поиска

Содержание ValueJet VJ1324X

Отзывы:

MUTOH ValueJet VJ1324X, Руководство по эксплуатации, Страница: 181 / 264

Результаты поиска

Содержание ValueJet VJ1324X

Отзывы: