MUTOH ValueJet VJ1324X Скачать руководство пользователя страница 164

Страница: 164 / 264

Panel setup menu

VJ-1324X OPERATION MANUAL

164

5.1 Setup menu

5.1.11

Head Travel menu

Sets up the range that the print head moves while printing.

NOTE

• The minimum travel range of the printer’s CR is 500mm.

• Note that even when the media with a width that is below 500mm is loaded while the printer is set

to “Data” or “Media Width”, the actual CR travel range does not go below 500mm.

5.1.12 Multi Strike menu

Sets up the overwrite count per line.

Setup item

Setting

Description

Distance

<Data>

The print head moves the range of the print data width.
The printing speed will be improved since the moving range
of the print head is optimized.

Machine

The print head moves from origin to the maximum printable
media width.

The print head moves the range of the media width.

—

• [Enter] key: saves the setting and shifts to the previous

menu.

• [Cancel] key: cancels the setting and shifts to the previous

menu.

5.1 Setup menu

Setup item

Setting

Description

Multi Strike

<1 time> to 9 times

Set the overwrite count.

—

• [Enter] key: saves the setting and shifts to the previous

menu.

• [Cancel] key: cancels the setting and shifts to the previous

menu.

5.1 Setup menu

Содержание ValueJet VJ1324X









































































































































































































































































Результаты поиска

Содержание ValueJet VJ1324X

Отзывы:

MUTOH ValueJet VJ1324X, Руководство по эксплуатации, Страница: 164 / 264

Результаты поиска

Содержание ValueJet VJ1324X

Отзывы: