MUTOH ValueJet VJ1324X Скачать руководство пользователя страница 163

Страница: 163 / 264

VJ-1324X OPERATION MANUAL

Panel setup menu

5.1 Setup menu

163

5.1.9

Prev. Stick menu

Sets up to prevent media from sticking when printing starts.

NOTE

• When the Output Mode menu is set to “Take-up”, the setting for the Prev. Stick menu is disabled.

5.1.6 Output Mode menu

5.1.10 StandbyHeating menu

Sets the time to preheat the heater while the printer is n standby mode.

Setup item

Setting

Description

Prev. Stick

<Off>

The stick-prevent operation is not performed.

The stick-prevent operation is performed.
Feed the media back and forth to prevent from sticking.

—

• [Enter] key: saves the setting and shifts to the previous

menu.

• [Cancel] key: cancels the setting and shifts to the previous

menu.

5.1 Setup menu

Setup item

Setting

Description

Standby Heating

10 minutes - <60 minutes>

Sets the time to pre-heat the heater.
When the preset time has passed, each heater turns Off.

—

• [Enter] key: saves the setting and shifts to the previous

menu.

• [Cancel] key: cancels the setting and shifts to the previous

menu.

5.1.1.1 User Type menu

Содержание ValueJet VJ1324X









































































































































































































































































Результаты поиска

Содержание ValueJet VJ1324X

Отзывы:

MUTOH ValueJet VJ1324X, Руководство по эксплуатации, Страница: 163 / 264

Результаты поиска

Содержание ValueJet VJ1324X

Отзывы: