MUTOH ValueJet VJ1324X Скачать руководство пользователя страница 143

Страница: 143 / 264

VJ-1324X OPERATION MANUAL

Panel setup menu

5.1 Setup menu

143

Standard Adjust Print Menu

Adjusts only the print mode in the user type setting which is currently set.

Custom Adjust Print Menu

Perform adjustment for all patterns (A to F).
All print modes will be adjusted.

Setup item

Setting

Description

Adj. Print1: Standard

Confirm ptn.

Print the test pattern for the alignment.
Check before adjusting.

3 .6.1.1 Standard Confirmation Pattern

Rough pattern

Perform this adjustment when the misalignment is large.
Print adjustment patterns and enter the set values.

3.6.1.2 Standard Rough Adjustment Pattern

Fine pattern

Perform this adjustment when the misalignment is small.
Print adjustment patterns and enter the set values.

3.6.1.3 Standard Micro Adjustment Pattern

—

• [Cancel] key: cancels the setting and shifts to the previous

menu.

5.1.1.1.3 Adjust Print menu

Setup item

Setting

Description

Adj. Print2 : Custom

Confirm ptn.

The test patterns of A to F will be printed for Adjust print.
Check before adjusting.

3.6.2.1 Custom Confirmation Pattern

Rough Ptn. ALL

Perform this when the degree of misalignment is large.
Print Adjust patterns A to F and enter the set values.

3.6.2.2 Custom Rough Adjustment Pattern

Rough Pattern A to F

When the degree of misalign is big, print out an adjust pattern
selected from A to F and enter the value.

3.6.2.3.1 Fine Pattern ALL

Fine Ptn. ALL

Perform this when the degree of misalignment is small.
Print Adjust patterns A to F and enter the set values.

3.6.2.3.2 Fine Pattern A to F

—

• [Cancel] key: shifts to the previous menu.

5.1.1.1.3 Adjust Print menu

Содержание ValueJet VJ1324X









































































































































































































































































Результаты поиска

Содержание ValueJet VJ1324X

Отзывы:

MUTOH ValueJet VJ1324X, Руководство по эксплуатации, Страница: 143 / 264

Результаты поиска

Содержание ValueJet VJ1324X

Отзывы: