MUTOH ValueJet VJ-1638UR, Руководство по эксплуатации

Страница: 71 / 154

Set 3: Method of Cut 71
Note
• When the media detection is set to “Off”, the media cannot be cut automatically.
"**>6: Media Initial" P. 67
• Some media may not be cut (cannot be cut at all or cannot be cut finely). In such a case, set the “Output Mode menu” to “Off” and cut the media manually.
"Set 2: Output Mode" P. 70
Set 3: Method of Cut
Sets the media cutting operation after printing.
Setting values
Cut with fewer steps than “Single Cut - 3 steps”.
Suitable for media with narrow width.
Normal cutting method.
This is the initially set value.
Set when unable to cut with “Single Cut - 2
steps”.
Suitable for media with narrow width.
Set when unable to cut with “Single Cut - 3
steps”.
Cut Pressure menu
Sets the media cutting pressure for the cutting operation.
Setting values
Cut the media at low pressure.
Suitable for thin media or if the “High” pressure
setting is too strong.
Normal cutting pressure.
This is the initially set value.
Set 3: Method of Cut
Cut : Single Cut - 2 steps
Cut : Single Cut - 3 steps
Cut : Double Cut - 2 steps
Cut : Double Cut - 3 steps
Cut : Single Cut - 3 steps
Enter
Cut Pressure : Low
Cut Pressure : High