02/2014
_____________________________________________________________________________________________________________________
11
3. Technical Features
The processor-controlled MTP200i..-E universal measuring transducer with limit signal transmitter of the DuoTec®
series meets all requirements for temperature, resistance, current and voltage measurement in process automation
thanks to its functionality.
Reciprocal monitoring of the dual processor system (DuoTec® technology) in combination with further safety
measures in accordance with EN 61508 ensures that the unit meets the SIL2 level.
Configuration, parameterization and calibration are interface-controlled and can be carried out easily and quickly
through user-friendly support provided by the WINSMART® PC program. Automatic logging of the configuration
selected in the device enables rapid and reliable documentation after completion of the programming work.
The related electrical equipment meets all requirements of the basic specification EN 60079-0:2004 and is EMC-
tested.
16-Bit-processor and 8-Bit- processor in accordance with DuoTec®-technology
Intrinsically safe measuring inputs as per protection class [Ex ia] IIC or [Ex ib] IIC
Thermocouple measurement input with internal or external Pt 100 reference junction
Pt-100-measuring input in 2-, 3- und 4-wire circuit
Potentiometer / resistance type remote sensor measurement input for 0-600 or 0-5000 Ohm
mV-measuring input for +70/-35 mV
Voltage-measuring input for +/-10 V
Current-measuring input for +/-20 mA
Analog output for 0/4-20 mA or 0/2-10 V
Output signal control by read back of mA-value
2 relay outputs for limit value monitoring and/or maintenance requirement report
2 passive short-circuit-proof 50mA- transistor output for the limit value monitoring and/or maintenance
requirement report
1 relay output for the maintenance requirement report
COM-interface at the front for online entrance
Galvanic separated RS485-interface
Alternative AC or DC supply with large voltage supply range and under voltage cut-off
