TOOLS REQUIRED:
Hardware
Power Drill
5/32" or 1/3" Drill Bit
Phillips Head Screw Driver
Spirit Level
Component Checklist
Imp ortant N otes
Wall Arm Assembly(x1)
Mounting the Wall Plate
Timber Stud Wall
•
•
•
•
Adapter Panel(x1)
5/32” holes
WARNING
wood
stud
wall
A
1
M4x10mm Phillips
Head Screw(x4)
M4x20mm Phillips
Head Screw(x4)
M5x16mm Phillips
Head Screw(x4)
Spacer(x4)
Alligator anchor(x3)
M6x20mm Phillips
Head Screw(x4)
M6x30mm Phillips
Head Screw(x4)
Allen Key (x1)
Flange Bolt (x3)
Flange Bolt (x3)
M5x20mm Phillips
Head Screw(x4)
M6x12mm Phillips
Head Screw(x4)
M8x12mm Hex
Head Screw(x4)
washer
(x4)
•
Installation will require a minimum of two people. Under no circumstances should this be
attempted by one person.
•
We highly recommend this product be installed by a qualified professional person.
Please do not begin installation until you have thoroughly read and understood these instructions.
•
The Articulating Wall Mount supports display mounting from 26” to 40”, VESA 100/200 x 100/200 depending
on the TV mounting plate attached (provided separately) and supports a maximum of 80 lbs. (36kg).
Ensure the wall you plan to use will safely support 4 times the combined weight of the Articulating
Wall Mount and your chosen display.
Under no circumstances should this product be mounted to metal studs.
The manufacturer does not accept responsibility for incorrect installation.
• Tighten screws so that wall plate is firmly attached
but do not over tighten. Over tightening can damage
the screws, greatly reducing their holding power.
• Never tighten in excess of 80” / lb. (9N.M.)
• Make sure that mouting screws are anchored into
the center of the studs. The use of an “edge to edge”
stud finder is highly recommended.
MV-ARM-S
INSTALLATION INSTRUCTIONS
Country of origin: China Contact number: 866-395-0370 Warranty: 5 years
Use the wall plate as the template, then mark the wall plate holes onto the wall.
