background image

X - P 2 0 0

 MODE

 INPUT

INSTRUCTIONS  FOR  USE

Thank you for purchasing the Musical Fidelity

X-P200 power amplifier.

Used properly and carefully, it should give you many years of

outstanding musical reproduction.

Aesthetically, the X-P200 power amplifier is a perfect match for the

X-Pre 

V3

pre-amplifier and X-RAY V3 CD player.

Together, they form one of the finest hi-fi systems available.

Dust regularly with a soft cloth or soft brush, but be careful when

using cleaning or polishing agents - they may harm the surface finish.

If you have any questions about your audio system,

please consult your dealer who is there to help and advise.

POWER  AMPLIFIER

Issue 3  Sept 2004

X-P200 PowerAmplifier                      Page 1 of 7

X - P 2 0 0

Содержание X-P200

Страница 1: ... perfect match for the X Pre V3 pre amplifier and X RAY V3 CD player Together they form one of the finest hi fi systems available Dust regularly with a soft cloth or soft brush but be careful when using cleaning or polishing agents they may harm the surface finish If you have any questions about your audio system please consult your dealer who is there to help and advise POWER AMPLIFIER Issue 3 Se...

Страница 2: ...he unit must not be exposed to dripping or splash ing and no objects filled with liquids such as vases must be placed on the unit Keep the X P200 away from heat such as radiators No naked flame sources such as lighted candles should be placed on the unit Place all connecting cables where they are not likely to be walked on or trapped by items placed on them Output Power stereo mode 125 Watts one c...

Страница 3: ...ge mode continued If in doubt about bi amplification please contact your dealer for advice BEFORE SWITCHING ON Plug the accessory IEC mains lead into the rear panel socket then the other end into a wall outlet Turn the volume control on your pre amplifier to minimum OPERATION Press the POWER button on the X P200 amplifier the blue power LED on the front panel will light indicating that the unit is...

Страница 4: ... The X P200 is a stereo amplifier but can instead be used in bridge mode to obtain a single mono output with higher power However do not attempt both speaker connection methods at the same time Conventional stereo use Connect each of your loudspeakers to the pair of terminals on the back panel marked LEFT and RIGHT SPEAKER OUTPUT The wiring must be in phase namely the red and black terminals must ...

Отзывы: