background image

 

 

 

 

 

 

Instructions for use 

Thank you for purchasing the Musical Fidelity M8 Preamplifier fully balanced dual mono pre-amplifier.  

This preamplifier is designed with high quality control and especially balanced sources in mind.  

Two  balanced  (XLR)  inputs  take  care  of  balanced  audio  for  the  best  in  signal  to  noise,  transient  reproduction 
and  dynamic  range  from  balanced  sources.  Inside,  the  balanced  signal  path  is  fully  maintained,  from  input  to 
output, with a specially developed dual mono fully balanced preamplifier circuit. 

 The  balanced  volume  control  is  a  quad  laser-trimmed  attenuator  giving  0.5dB  steps  of  perfect  matching, 
allowing  precise  stereo  imaging  and  ultra-low  noise  and  distortion.  The  outputs  are  also  balanced  allowing 
connection  of  balanced  input  power  amplifiers  to  realise  a  completely  balanced  system  from  source  to 
speakers. 

Units with single – ended (RCA) inputs and outputs are catered for with 6 selectable RCA inputs, and two sets 
of outputs, one fixed for recording, etc, the other is the main controlled output. 

 The M8 Preamplifier has been designed to mix-and-match input/output signal types and use the unit as a single 
ended to balanced (or vice versa) converting preamplifier. It is also designed to allow use of both balanced and 
single ended outputs, simultaneously, if required. 

 All conversions are carried out automatically within the unit, all that needs to be done is choose and connect 
the correct input and output leads. 

The  M8  Preamplifier  is  designed  to  be  partnered  with  present  and  future  M8  or  M6  series  products  or 
alternatively, may be used with any other high quality hi-fi components. This combination yields one of the best 
high-fidelity systems available at any price.  

Used properly and carefully, it should give many years of outstanding musical reproduction. 

Dust regularly with a soft duster or soft brush, but be careful when using cleaning or polishing agents - they may 
harm the surface finish. 

If there are any questions about the audio system, please consult the dealer who is there to help and advise.
 

 

Содержание M8 PRE














Отзывы: