For your safety
User manual 55170_hdb_en_13
11 / 145
NOTE
Use only a power supply unit that allows max. 60 V DC or 25 V AC in case of
error. The power supply must comply with SELV or PELV.
Protective measures by
the
machine operator
Pay absolute attention to the instructions in this manual.
Pay attention to the test regulations contained in the operating instructions
of all connected components.
2.2
Intended purpose
Intended use
IMPACT67 is a decentralized fieldbus module. It can be used in harsh indus-
trial environments up to degree of protection IP67.
Operation of the device in accordance with its designated use and the degree
of protection IP67 are only guaranteed if open male and female connectors
are closed using screw plugs.
Designated use also includes EMC-compliant electrical installation. The de-
vice is designated for use in industrial environment. Radio interference may
occur if used in a domestic or mixed environment.
If the fieldbus module is used in domestic and mixed environments, the
applicable standards must be observed.
Foreseeable misuse
Do not alter the design, engineering, or electrical features of the module.
Do
not
use the module outside the application fields described in this
manual, the Technical Data or in the operating instructions.
Do
not
use the module as safety-related device. It does not meet the rel-
evant standards. Safety functions of the system are not ensured!
Do
not
use the Off state of the module outputs for safety-related require-
ments of the system/machine!
Do
not
use the module outdoors or for continuous operation in liquids.
Do
not
clean the module with a high-pressure cleaner.
Do
not
use the module as a climbing aid.
Warranty and liability
claims
Warranty and liability claims shall be lost if
the product is not used according to its designated use,
damage is caused because the manual and the operating instructions
have not been observed,
the personnel was/is not qualified.
2.3
Environmentally friendly disposal
Comply with
country-specific
waste disposal regula-
tions.
Always dispose of scrap devices in compliance with the valid
country-specific regulations for waste disposal
(e.g., the European Waste Code 16 02 14).
Only qualified persons
may sort scrap materi-
als.
Proceed with caution when dismantling the device since you could injure
yourself.
Sort the separated components into the correct recycling line.
