Murphy Xpansion IX3212, Справочное руководство

Страница: 58 / 62

Section 80 00-02-0829
2018-02-26 - 56 -
6 Specifications
Operating Voltage :
12V/24V nominal (8-32 V)
Reverse polarity protection
Operating Current:
Total: 70 A, simultaneous active outputs
Standby (idle) current draw: <100 mA, 80 mA typical
Sleep current draw: 35 mA typical
Inputs :
Digital:
12 digital tri-state (high-side, low-side, open)
Input impedance: 7.7 k
Ω
12V System 24V System
ON
min
ON
max
ON
min
ON
max
High-Side 8.625 V 17.25V
Low-Side 2.64 V 5.28 V
Analog:
2 analog (resistive), input impedance 2.2 k Ω pull-up
6 analog (0 - 5 VDC), input impedance 100 k Ω pull-down
10 bit resolution
Outputs:
12 Digital High current (15 A maximum each, 70 A total)
Configurable as high-side switch, open-loop PWM or up to 6 H-bridge pairs
PWM frequency: 500 Hz (Outputs 1-6) and 100 Hz (Outputs 7-12)
Maximum off state leakage current: <0.1 mA
Open Load Detection
0.2 A minimum, 0.5 A typical
Sensor Supply: 5 VDC at 70 mA
CAN Interface: CAN 2.0B Active, SAE J1939 Proprietary A messaging, 250 kbps
Housing
: PBT cover with E-coated cast aluminum base
Dimensions : 245 mm (L) x 140 mm (W) x 50 mm (H)
Weight : 2 lbs (900 gram)
Connectors : Nickel-plated copper alloy contact surface
Deutsch DT series 12 pin (J3, J4, and J5);