Murideo MU-M4SOL Скачать руководство пользователя страница 113

Страница: 113 / 130

MU-M4SOL

User’s Manual

Page 113 of 130

5.4.3

System Settings

The System Settings screen provides access to the system configuration. The System Settings screen
is depicted in the figure below. The upper part of the screen displays read-only system information.

Figure 140: System Settings Screen

The System Settings page provides the following information and configuration options for
the

MU-M4SOL

system:

◼

App Version

. Tester firmware version.

◼

Local IP

. Allocated IP address (for future use).

◼

Features

. A list of supported features:

◼

Wi-Fi AP

. Whether Wi-Fi connectivity is supported.

◼

HDMI Gen

. Whether the HDMI traffic generation feature is supported.

◼

. The name of the AP (access point) used to establish Wi-Fi connectivity.

◼

Local PDF

. Indicates where the unit is capable for creating a PDF report file locally

◼

HW Version

. Internal use

◼

Units

. Tap to select the unit of measure to be used (feet/meters). The current selection

appears on a dark gray background.

◼

Date/Clock Settings

. Tap on the button configure date and time settings.

Содержание MU-M4SOL



































































































































Результаты поиска

Содержание MU-M4SOL

Отзывы:

Murideo MU-M4SOL, Руководство пользователя, Страница: 113 / 130

Результаты поиска

Содержание MU-M4SOL

Отзывы: