background image

Prior to roughing consult with local, state, and federal codes for proper mounting height.

IMPORTANT

This fixture is intended to dispense water that has been lowered in temperature, but otherwise remains 
unchanged by the materials in the drinking fountain. It is common for electrical equipment to be grounded to 
water lines either within a structure or away from it. Every attempt should be made to prevent this kind of 
grounding from generating electrical feedback into the drinking fountain creating electrolysis. Electrolysis will 
cause a metallic taste or cause water metal content to increase.

A dielectric coupling must be used to connect the drinking fountain to the water supply . A nonmetallic coupler is 
furnished with this water cooler to meet this requirement.

NOTICE

ROUGHING-IN AND DIMENSIONAL DRAWING

A151400S-VR-BF4 Wall Mounted Drinking Fountain

NOTES: 

Dimensions shown for Adult ADA compliant installation. For Child ADA compliant parallel 

approach installation, decrease height of installation by 3 inches. Provide clear floor space as required. 
Adjust vertical dimensions as required to comply with federal, state, and local codes.

 

A151-VR-BF4

Page 2 of 19

New: 

10/28/2020

7021-021-001

MURDOCK  MFG.  • 

15125  Proctor  Avenue  •  City  of  Industry,  CA  91746  USA 

Phone  800-453-7465  or  626-333-2543  •  Fax  626-855-4860  •  www.murdockmfg.com

Member of

CONTEMPORARY WATER COOLERS

 

I N S TA L L AT I O N / M A I N T E N A N C E  I N S T R U C T I O N S

 DRINKING FOUNTAINS

 

32

1
4

"

12"

21"

23"

11

1

2

"

*51

1
4

"

*33"

6"

1

3
8

"

14

3
4

"

4

5
8

"

GENERAL NOTES:

1. ALL DIMENSIONS ARE IN INCHES [MM].

*2. DIMENSIONS SHOWN ARE FOR RECOMMENDED ADULT HEIGHT. ADJUST VERTICAL

DIMENSIONS AS NECESSARY TO COMPLY WITH FEDERAL, STATE & LOCAL CODES.

31

1

8

"

4"

FINISHED

FLOOR

Содержание A151-VR-BF4 Series




















Отзывы: