background image

 

A151-VR-BF4

Page 11 of 19

New: 

10/28/2020

7021-021-001

MURDOCK  MFG.  • 

15125  Proctor  Avenue  •  City  of  Industry,  CA  91746  USA 

Phone  800-453-7465  or  626-333-2543  •  Fax  626-855-4860  •  www.murdockmfg.com

Member of

Description

Illuminated LCD display, counts bottles, and has a filter replacement alert function

Bottle Counting Function

The software applies a flow volume of approximately 16.9 fl oz (volume in standard size plastic water 
bottle) to each bottle counted. If the flow volume is less than 16.9 fl oz there will be no count but the 
volume will accumulate, so that part way through the next cycle the total bottle count will change.

See the following page for models with -BCD Bottle Counter Display (A151-BF4-BCD)

OPTIONAL -BCD BOTTLE COUNTER DISPLAY 

BOTTLE COUNTER ADJUSTING & RESETTING INSTRUCTIONS:

NOTE: Bottle Counter Has Multiple Functions

Reset/ Mode Button
• Counts refilled bottles, otherwise purchased
• Adjustable for Units with and without filters
• “REPLACEMENT FILTER” alert function
• Alert reset, when filter is replaced

CONTEMPORARY WATER COOLERS

 

I N S TA L L AT I O N / M A I N T E N A N C E  I N S T R U C T I O N S

 DRINKING FOUNTAINS

 

ILLUMINATED LCD DISPLAY

Содержание A151-VR-BF4 Series




















Отзывы: