4
Saddle
The saddle should be box shaped.
Frame (front section)
Fold and assemble shape all
tubes without using glue then
apply glue.
Frame (rear section)
Fold the rear section of the
frame in a half and glue the
halves together. Press it
down with something heavy
to make it flat and let it dry.
Pedals
Fold the pedal in half and then apply
glue. Press it down with something
heavy to make it flat and let it dry.
Once the glue is dry, bend the tips.
Motor
The motor consists of a hexagonal
cylinder part and the part folded in
half before gluing.
Press down the folded part after
gluing to make sure it dries flat.
Chain drive
Fold the chain
drive part in half
and glue the
halves together.
Press it down with
something heavy
to keep it flat until
it dries.
Rear fender
Fold the rear
fender part in half
and glue the
halves together.
Press it down with
something heavy
to keep it flat until
it dries.
* Do not glue the two parts
together until the final stage of
bicycle assembly.
All right reserved, Copyright Murata Manufacturing Co.,Ltd. 2006
