ENC-03M type
-
4
-
6. Instruction for use
1) One sensor can detect one angular velocity along one axis. You need two sensors when you
want to detect around 2 axes angular movement.
2) Install sensors in a direction that the rotating axis is parallel to long side of the sensor.
3) There are 2 types of sensors. One is the ENC-03MA and other is ENC-03MB. The ENC-03MA &
ENC-03MB have the same specifications except for its resonant frequencies. When using same
type of ENC-03Ms, output swell may occur due to adjacent resonant frequencies. It can be
avoided by using different types.
4) When detecting just one axis, select model ENC-03MA or ENC-03MB. When detecting two axes,
select models ENC-03MA and ENC-03MB. When detecting three axes, select 2 pcs of ENC-
03MA and 1pc of ENC-03MB and follow the bellow guideline to avoid mutual interference:
Install one ENC-03MA on a separate PCB from the other installed ENC-03MA & MB.
Two devices are kept apart as far as possible.
Use acoustical material in order to isolate the sound wave as needed.
CW(+)
ENC-03MA
ENC-03MB
ENC-03MA
CCW(-)
M JPN
MA 315
