Munters HCUw, Эксплуатация и техническое обслуживание

Страница: 17 / 122

15
Suct: 000 to 650 psi pressure range of
gauge
Disc: 000 to 650 psi
COMPRESSOR SET POINT
HIGH DISCHARGE PRESS
Shutoff: 600 psi Compressor will lock
out at this pressure
COMPRESSOR SET POINT
LOW SUCTION PRESS
Shutoff: 025 psi Compressor will lock
out if suction drops to
this pressure
COMP A -- CYCLE OFF LOW TEMPERATURE
Setpoint: 034.0 F Cycles the
compressor off when
the coil LAT drops to
this value
Delay: 330 s Delay for the above
function
COMP A -- CYCLE OFF LOW PRESSURE
Setpoint: 090 psi Cycles the
compressor off when
the suction press
drops to this value
Delay: 330 s Delay for the above
function
COMP B -- CYCLE OFF LOW TEMPERATURE
Setpoint: 034.0 F Cycles the
compressor off when
the coil LAT drops to
this value
Delay: 180 s Delay for the above
function
COMP B -- CYCLE OFF LOW PRESSURE
Setpoint: 110 psi Cycles the
compressor off when
the suction press
drops to this value
Delay: 180 s Delay for the above
function
COMP B --- CYCLE ON HIGH SUCTION PRESSURE
Set Point: 156 psi When compressor A
suction pressure
rises to this setpoint,
compressor B will
energize for its
minimum on time
after the delay
Delay: 0060s
COMP B -- CYCLE ON MIN SUCTION PRESS
Setpoint: 128 psi Compressor B will
not cycle on if suction
pressure is less than
or equal to this value