10
|
© Munters AB, 2018
3. BEFORE USING
3.1 Delivery check
Upon receipt, inspect the fan for external damage and if found, inform the transport agent without delay. Check the data
on all the rating plates, especially voltage and frequency. After placing the motor in the working position (see chapter 5,
Installation), turn the propeller by hand while the fan is switched off to verify smooth rotation of the propeller.
Check in particular the fan blades, the hub and the spider.
3.2 Packaging and transport
The fan components are usually delivered with packaging. Each package has to be handled properly in order to avoid
damages.
3.3 Structure
The fans consist of the following components:
•
tilting bracket;
•
suspension arm;
•
gear-motor and frame complete fixture;
•
propeller hub galvanized steel;
•
propeller composed of 5 blades in aluminium alloy; blades will be attached to the hub using screws;
•
suspension and attachment (stainless steel wire cable, clams, hooks, etc.);
•
wind sensor (optional).
WARNING
•
it is mandatory to secure the Breeze Fan with the attachment wires for safety measure so make sure you
have the proper mounting structure;
•
regarding the fan minimum spacing please see Fig.7 on chapter 5.4
•
no person must stand under the fan until the installation is completed
WARNING
The fan should not be installed unless the structure on which the fan is to be mounted is of solid construction,
undamaged, and is able to support the loads of the fan and its mounting structure. It is the responsibility of the
customer and/or end user to verify the stability of the structure.
