mundoclima AEROTHERM BBC 200, Инструкция по установке и эксплуатации

Страница: 95 / 176

39
10 - CONTROL
1 - Manually turn e-heater ON (E-heater)
13.1 - Water Temperature setting (SET)
Icon SET will be lightened when setting water temperature or setting days for vacation.
13.2 - Date setting (Day)
Icon DAY will be lightened when setting days for vacation;
Icon DAY will be lightened when under vacation mode.
15 - Clock and clock setting
Icon shows the clock.
Whenever there is any setting for clock, SET CLOCK will be lightened.
14 - Programmes (Timer)
There are six timers can be set.
If anyone of them has been set, icon will lighten the corresponding one when screen is unlocked;
If there is none of timers has been set, will keep extinguished.
If timer is being set, icon will flash the corresponding one with 2 sec. frequency as well lighten the timer which has
been set.
Press E-HEATER
Icon will flash.
Press
For confirm manually turning E-heater on, then E-heater is activated to Heat up water to the target temperature.
After that, if need manually turn E-heater on again, please repeat these steps.
If E-heater is already ON, Press “E-HEATER” will lead to show invalid icon on the display.
Long pressing the “E-HEATER” key for 10 sec. then can shift to set the temperature display unit; from "°F" to "°C" or
from "°C" to "F"; the default is "°C"; (when it's shifted to display "°F", it still will display "°C" while it operates spot
check).
If E-heater is OFF, follow these steps below to manually turn it on.
Any press of button is effective only under button and display unlocked state.