mumbi m-TG100, Руководство пользователя

Страница: 10 / 12

5. Close the cover by clipping the round side first and locking the angled side
with the retaining collar afterwards. Make sure that the seal is placed correctly.
NOTE: If the frontage is very coarse-grainded we recommend an additional sea-
ling of the back (e.g. with acrylic). Thereby you can prevent that water enters the
case at the backside.
Set up receiver
1. Drill holes in the wall and insert the dowels.
2. Insert the batteries, pay attention to the correct polarity.
3. Close the battery compartment and mount the receiver to the wall.
Safety and maintenance instructions
• Make sure that all electrical connections, such as cable connections, comply
with to the relevant policies.
• Attention! Do not overload power outlets and extensions, this can cause fire or
an electric strike.
• If you are facing any trouble with using the device, or if you have any safety
issues, please contact an expert.
• Keep out of the reach of children.
• Avoid hard impacts, this can lead to damaging the electronic circuits.
• Never replace damaged power leads yourself! Please remove the devices from
the mains and contact a specialist company/dealer.
• Opening and repairing the device must be performed only by an authorized
specialist.
• Wireless systems could be affected by phones, microwaves and other electro-
nic devices that are operating within the 433.92 MHz field. Keep a minimum di-
stance of at least 3 meters during the installation and operation of the device.
Maintenance
The device is maintenance-free, so please do not open the device. You will inva-
lidate your warranty if you open up the device. Clean the outside with a soft, dry
cloth or a brush.
Do not use any cleaning products that contain carbonic acid, benzene, alcohol or
similar substances. Such substances attack the surface of the device and their
vapours are also hazardous to health and explosive. Do not use any sharp-edged
tools, screwdrivers, wire brushes or similar to clean the device.
9