Multiva FX300 SeedPilot, Руководство по эксплуатации и обслуживанию

Страница: 101 / 208

3. Adjust the feeding quantity in accordance with section 6.6.10. Adjusting the width of the
small seed feeder roller.
4. Adjust the position of the bottom ap of the small seed hopper’s feeder units in
accordance with section 6.6.11. Adjusting the bottom ap position in the feeder units of
the small seed hopper.
5. Adjust the shut-off plates of of the small seed hopper’s feeder units in accordance with
section 6.6.12. Adjusting the shut-off plate position in the feeder units of the small seed
hopper.
6.6.4. Adjusting the hopper divider
Figure. 6.6.4. - 119. Adjusting the hopper divider
DANGER
Before adjusting the divider, ensure that the hoppers are empty.
1. Remove the two locking pins (10) of one side of the divider (11).
2. Push the divider to the appropriate position.
3. Reinsert the locking pins.
4. Adjust the other side.
Table. 6.6.4. - 15. Hopper volumes in different positions of the divider on the
FX300.
FX300 Seed (L) Fertiliser (L) Total (L)
1. 1,100 2,400 3,500
2. 1,250 2,250 3,500
3. 1,350 2,150 3,500
4. 1,450 2,050 3,500
Operation and maintenance manual
1.00 FX300 and FX400 SeedPilot
101 (208)