Multiva Cerex 300 SeedPilot, Руководство по эксплуатации и обслуживанию

Страница: 89 / 165

2945
Figure. 6.8. - 96. Adjusting the seeding depth of the coulter
1. Remove the cotter (1).
2. Insert the pin (2) in the hole at the desired seeding depth and replace the cotter.
6.9. Adjusting the coulter weight
Figure. 6.9. - 97. Adjusting the coulter weight
1. Adjust the coulter weight by altering the length of the two hydraulic cylinders (2).
The cylinder turns the tube (4) of the coulter mounting, which causes the four
rubber bars (3) to compress, resulting in increased force.
The coulter weight adjustment range is 20-80 kg. On light soil, use smaller weight
and on hard soil, greater weight. The weight should rst be set too high and then
lowered, if needed, than to adjust it too low to start with. The coulter weight can
be adjusted during operation. For example, at the end of the eld with deep soil,
the coulter weight may be lessened, and at the end with clay soil, increased to
maintain the desired seeding depth.
The coulter weight scale (1) shows the position of the coulter weight. In the scale
of 1-4, 4 is the highest coulter weight.
Operation and maintenance
manual
1.00 Cerex 300
88 (156)