WARNING:
Read, understand and follow all instructions before operating the
Multitool:
1.
ALWAYS WEAR EYE PROTECTION.
A full-face visor
is preferred. Any Belt/Disc Grinder can throw foreign objects
into the eyes
2.
AVOID CONTACT
with Belt or Disc. The abrasive belt
when running is an aggressive cutting tool. Extra care should
be exercised when using coarse grit belts because of their
rapid cutting action.
3.
KEEP CHILDREN AWAY.
All visitors should be kept a
safe distance from the work area.
4.
BOLT THE BENCH GRINDER
securely to the bench or
supporting surface to stop it from tipping over or moving
when in use.
5.
DO NOT MOUNT
the attachment protruding into walkways.
6.
KEEP WORK AREA CLEAN.
Cluttered areas and benches
invite accidents.
7.
ALWAYS WEAR A DUST MASK
to prevent dust
inhalation when adequate ventilation or extraction is not
available.
8.
DO NOT WEAR LOOSE CLOTHING
which may become
entangled in the machine. Wear protective hair covering to
contain long hair.
9.
ALWAYS HOLD
the work piece firmly when grinding and
apply a light and steady pressure against abrasive disc or belt.
10.
ALWAYS GRIND ON THE DOWNWARD SIDE
of the
grinding disc. Grinding on the upward side of the disc could
cause the work piece to fly out of position, resulting in injury.
11.
DO NOT USE
belts that are damaged, torn or show signs of
wear.
12.
ALWAYS INSTALL BELTS
with arrows in the back of the
belts facing the correct direction. Belts and lap joints must be
fitted facing the correct direction. See sketch below.
1.
2.
5.
4.
3.
6.
7.
8.
PART LIST:
1.
6” (Plus) or 8” (Plus 8) Motor with the Main Bracket (A.) and Drive
Pulley (B) attached.
2.
Guards for grinding wheel, supplied with the motor.
3.
362 Tensioner Assembly.
4.
7” Cover Disc.
5.
7” Abrasive Disc.
6.
50 x 915mm Abrasive Belt.
7.
6 x Counter sunk screws to fit the Cover Disc (4) to Drive Pulley (A)
8.
5/16” Bolt and washer used to attach the Tensioner Assembly (3) to the
Main Bracket (A)
A.
B.
Fig 1.
The words “us”, “we” or “our” refers to P.A Products or their authorized agent.
The warranty will only apply if the operating fitting instructions are followed.
The warranty will not apply for a period of 3 years from the date of original
purchase against any defect in our product, which can be proved, to our
satisfaction to have been caused by faulty materials or workmanship. Our
liability is limited to the cost of repairing or at our option, replacement of the
defective goods or parts of the goods. We will not be liable for any defect
caused by unauthorized repair.
INSTRUCTIONS TO FOLLOW FOR WARRANTY CLAIMS:
If warranty claim is made, we must be notified as soon as possible after assumed
defect has become apparent.
Goods may only be returned for credit with the approval of PA Products in Australia
The customer must prepay all freight charges for returned goods.
We will contact the customer with an advice after inspecting the goods to determine
with the customer what action should be taken in the circumstances.
WA
RRANTY AND CONDITIONS OF SALE
Specifications
Multitool 362
Belt size 36” x 2” (915 x 50mm) Disc size 7” (178mm) Contact Wheel 3½ (89mm) dia. Suits most 6” (150mm) or 8” (200mm) bench grinders with minimum 1/3 H.P.
(248W) and shaft sizes of 1/2” or 5/8”.
Rating
Continuous Industrial.
Belt Applications
Oxide Belts
COURSE FINISH
Use 40 to 80 Grit aluminium
MEDIUM TO FINE
Use 100 to 80 Grit
VERY FINE
Use 250 to 400 Grit
MICROFINISHING
Use 3M Trizact 600 to 2000
HEAVY GRINDING OR THIN SECTIONS
Use Zirconia Belts 40,60,80
ALUMINIUM Always use belt grease to prevent clogging
WOOD Use Aluminium Oxide Resin Bond open or close cote 40,60,80,100,120 Gritsivi
PLASTICS, GLASS CERAMIC, GENERAL LAPIDARY
Use silicon Carbide Resin Bond Close Cote
FOR TECH SUPPORT VISIT WWW.MULTITOOLAUSTRALIA.COM OR IN AUSTRALIA CONTACT PA PRODUCTS (02) 63371-142
