Multitech MultiConnect MTPCIE-EV3, Руководство разработчика

Страница: 35 / 63

LABELING REQUIREMENTS
MultiConnect
®
PCIe MTPCIE-EV3 Developer Guide 35
Chapter 12 – Labeling Requirements
Approvals and Certification
Your Multi-Tech device is an industry and/or carrier approved modem.
For CDMA and EVDO Devices
The modem's MEID (Mobile Equipment Identifier) written in hexadecimal format is printed under the
barcode on the modem.
Example EV-DO EV3 Label
A sample EV-DO EV3 label
Note: Actual labels will vary depending on the regulatory approval markings and content.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
The label shown is larger than actual size.
1 - Multi-Tech Model Identification
2 - Multi-Tech Ordering Part Number.
3 - MEID (Mobile Equipment Identifier).
Host Labeling
The following statements are required to be on the host label:
This device contains FCC ID: {Add the FCC ID of the specific device}
This device contains equipment certified under IC ID: {Add the IC ID of the specific device}