MultiConnect
®
Cell 100 Series Cellular Modem
(MTC-LAT1 and MTC-LVW2)
MTC-LAT1 and MTC-LVW2 Quick Start
MultiConnect
®
Cell 100 Series Cellular Modem (MTC-LAT1 and MTC-LVW2)
MultiTech Systems
MultiConnect
®
Cell 100 Series Cellular Modem (MTC-LAT1 and MTC-LVW2)
MultiTech Systems
MultiConnect
®
Cell 100 Series Cellular Modem (MTC-LAT1 and MTC-LVW2)
MultiTech Systems
Quick Start
Quick Start
Quick Start
Side Panels for MTC-LAT1 or MTC-LVW2
Side Panels
The device has connectors on both sides of the housing.
The right side of the device contains Auxiliary (for Diversity), GPS, and
Cellular connectors. Depending on the model, the GPS connector may or
may not be present.
The left side of the serial device includes an RS-232 connector and the
power receptacle.
The left side of the USB device includes a USB connector.
Installing the Cellular Modem
1.
Connect a suitable antenna to the antenna connector.
2.
To connect to a serial interface:
■
Connect the DE-9 connector (9-pin) of the RS-
232 cable to the
RS-232
connector on the
cellular modem. Then connect the other end to
the serial port on the desired device.
■
Screw on the power lead from the power supply
module into the power connection on the cellular
modem.
■
Plug the power supply into your power source.
3.
To connect to a USB interface:
■
Connect the micro-USB connector end of the
cable to the
USB
connector on the back of the
cellular modem.
■
Connect the other end to your computer, either
directly or through a hub
4.
The B02 models support the use of a GPS receiver. If you
are using a GPS receiver with the modem, attach the GPS
cable to the
GPS
connector on the cellular modem.
5.
After power is applied:
■
The
POWER LED
lights after the device powers
up.
■
When the
STATUS LED
begins to blink, the
device is ready for use.
Mounting Device
1.
Locate the groove on the bottom of the cellular modem.
2.
Slide the mounting rod through the groove.
3.
To secure the rod to the desired surface, place and tighten
two screws in the holes on either end of the mounting rod.
Refer to the user guide for an illustration of the mounting
rod, as well as the dimensions for placement of the screws.
MultiConnect
®
Cell 100 Series Cellular Modem (MTC-
LAT1 or MTC-LVW2)
Document Part Number:
82102200L Rev. A
Copyright and Trademarks
This publication may not be reproduced, in whole or in part, without the
specific and express prior written permission signed by an executive
officer of Multi-Tech Systems, Inc. All rights reserved. Copyright © 2016
by Multi-Tech Systems, Inc.
Multi-Tech Systems, Inc. makes no representations or warranties,
whether express, implied or by estoppels, with respect to the content,
information, material and recommendations herein and specifically
disclaims any implied warranties of merchantability, fitness for any
particular purpose and non-infringement. Multi-Tech Systems, Inc.
reserves the right to revise this publication without obligation to notify any
person or organization of such revisions or changes.
MultiConnect, MultiTech and the MultiTech logo are registered
trademarks of Multi-Tech Systems, Inc. All other brand and product
names are trademarks or registered trademarks of their respective
companies.