manualshive.com logo in svg

Multitech MT5600DSVD2, Руководство пользователя

Поделиться
Скачать
Multitech MT5600DSVD2 Скачать руководство пользователя страница 78

MultiModemDSVD User Guide

70

2. Type 

AT&T1 

and press ENTER. This places your modem in analog loopback

mode in the originate mode. A 

CONNECT

 message should appear on your dis-

play. The modem is now out of command mode and in a pseudo-online mode.

3. Note that the CD LED is on. If you are set for 14,400 bps or higher, a speed LED

should be on. If the CD LED is not on, there is a defect in your modem.

4. Enter characters from your keyboard. For this test, typing multiple uppercase 

U

characters is a good way to send an alternating test pattern of binary ones and
zeros. The characters entered should be displayed on your monitor. The TD and
RD LEDs should flash when a character is entered.

5. To exit the test, type the escape sequence 

+++AT

 and press ENTER. This puts

the modem in online command mode. Then type either 

AT&T

 or 

ATH

 to return

to command mode.

6. Your modem passes this test if the data received on your monitor are the same

as the data entered from your keyboard. If different data appear on your moni-
tor, your modem is probably causing the problem, though it could also be your
computer. If your modem passes this test, but you are receiving errors while on
line, the remote modem or the phone line could be at fault.

Remote Digital Loopback Test (V.54 Loop 2)

The remote digital loopback test tests the phone lines and the circuits of both your
modem and a remote modem. In this test, your modem must be on line with another
modem that is set up to respond to a request for remote digital loopback. (Note that
some modems might not support remote digital loopback or might have it disabled.)
Data from your computer or terminal is transmitted through your modem and over
the phone line to the remote modem, where it is then looped back to your modem.

AT&T6
OK

Computer or Terminal

Local MultiModem

Remote MultiModem Computer or Terminal

Digital

Analog

Digital

Analog

AT&T6
OK
UUUUUUUUU
UUUUU

Figure C-2. Remote digital loopback test.

Test procedure

1. Arrange to have 

&T6

 set on the remote test modem.

2. Open your communications software and go into terminal mode. Type 

AT

 and

press ENTER; you should get an 

OK

 message. Type 

AT\N 

and press ENTER to

disable error correction.

3. Dial the remote modem and establish your online connection.

Содержание MT5600DSVD2































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды