Technical Specification
1) MODEL : TC - 19 (Temperature Controller).
2)
3) Input : J ,K (factory set)
4)
Display : 4 digit, single display, 7 segment LED.
Range : J type : 0 - 400 C / 0 - 600 C (factory set).
k type : 0 - 1200 C.
°
°
°
OPERATING MANUAL
TEMPERATURE CONTROLLER
TC-19
Model : TC - 19 - J,K
(96 X 96 mm)
5) Relay status : LED indication for relay
status.
6) Controlling action : TP/ON-OFF
7) Output : 1 relay, 230V AC, 5A
8) Power Supply : 110V TO 250V AC,
50/60Hz (SMPS).
CONNECTION DIAGRAM
POWER ON
display for 2 sec
Process Value
display for 2 sec, according
display for 2 sec
to the input sensor programmed.
8 8 8 8
. . .
t C j
T P
5 0
Note :
1) Press key continuously along with or key to set the SETPOINT.
2) The
3)
5) On normal powering instrument, below given display appears,
set value is saved by releasing the key during setting procedure.
To show the SETPOINT, press key momentarily.
4) Auto out time is 15 SEC. without saving.
SET POINT SETTING
process value
process value
on releasing SET key will store
the latest set value
5 0
2 0 0
5 0
press + key to set SET point
www.multispanindia.com
Page - 1
H
TC -19
Temperature Controller
SET
ºC
01 2 3
NC
C
NO
N
L
-
+
Supply:
230 V AC
T/C