OPERATING MANUAL
CURRENT CONTROLLER
OC 99
www.multispanindia.com
Page - 1
Technical Specification:
Reset Key
M: Glows when power is on.
O/C : Glows when overloads
U/C : Glows when underloads
(Dry run)
DISPLAY LED:
1) Micro Controller Based.
2) Size: 27 X 76 X 116 mm
3) Supply: 230V AC 10%, 50Hz
4
±
) Input : 0 To 30 Amp AC (Inbuilt CT).
5) Output : 1 Relay 1 C/O ,5 Amp at 230V AC
6) Knob for over current & under current setting
7) Din rail mounting.
This key is used to manual reset the relay.
INITIAL DELAY TIME:
Initial Delay time is fixed to 7 Sec. So, no action would take place during this period.
RST
UNDER CURRENT SETTING:
OVER CURRENT SETTING :
lower Knob is provided for set under current value range from 25 T0 90%
of over current.
Upper Knob is provided for set Current value range from 4 T0 30mA.
4
17
11
23
30
Over Current
Under Current
M
O/C
U/C
90
%
%
25
OC 99
RST
N
L
C
NC
NO
CUT
70
50