background image

PAGE 4 —EPOXY  SERIES WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV. #5 (10/06/10)

EPOXY/M SERIES TROWEL— TABLE OF CONTENTS

Proposition 65 Warning ............................................. 2
Silicosis/Respiratory Warnings .................................. 3
Table Of Contents ..................................................... 4
Parts Ordering Procedures ....................................... 5
Training Checklist ...................................................... 6
Daily Pre-Operation Checklist ................................... 7
Safety Information ................................................ 8-12
Operation And Safety Decals .................................. 14
Specifications (Trowel) ............................................ 15
Specifications (Engine & Electric Motor) ................. 16
General Information ................................................ 17

MQ WHITEMAN — EPOXY/M SERIES

TROWEL

Controls and Components ................................. 18-19
Basic Engine ........................................................... 20
Assembly and Installation .................................. 21-23
Pre-Inspection .................................................... 24-25
Initial Start-Up (Gasoline Engine) ...................... 26-27
Initial Start-Up (Electric Motor) ............................... 28
Operation ........................................................... 29-30
Options ............................................................... 31-32
Maintenance ...................................................... 33-37
Troubleshooting ................................................. 38-41
Explanation of Codes in Remarks Column ............. 42
Suggested Spare Parts ........................................... 43
Nameplate and Decals....................................... 44-45
Standard Handle Assembly ............................... 46-47
Quick Pitch™  Handle Assembly........................ 48-49
Thrust Bearing Kit Assembly .............................. 50-51
4-BladeSpider Assembly .................................... 52-53
Gearbox and Engine Mounts Assembly ............. 54-55
5.0 HP Honda Engine ........................................ 56-57
Hand Clutch Assembly S/N 42036 Above.......... 58-59
Hand Clutch Assembly S/N 42037 Below .......... 60-61
Electric Motor Assembly..................................... 62-63
Guard Ring Assembly ........................................ 64-65
Blades and Adjustment Fixture Assembly ......... 66-67
Lifting Bale Assembly ......................................... 68-69

HONDA GX160K1QA2 ENGINE

Cylinder Head  Assembly ................................... 70-71
Cylinder Barrel Assembly ................................... 72-73
Crankcase Cover Assembly ............................... 74-75
Crankshaft Assembly ......................................... 76-77
Piston Rings Assembly....................................... 78-79
Camshaft Assembly ........................................... 80-81
Recoil Starter Assembly..................................... 82-83
Fan Cover Assembly .......................................... 84-85
Carburetor Assembly ......................................... 86-87
Air Cleaner (Oil Bath ) Assembly ....................... 88-89
Muffler Assembly ............................................... 90-91
Fuel Tank  Assembly .......................................... 92-93
Flywheel Assembly ............................................ 94-95
Ignition Coil Assembly ........................................ 96-97
Control Assembly ............................................... 98-99
Labels Assembly ............................................ 100-101
Gasket Kit Assembly ............................................. 103

Terms and Conditions of Sale — Parts ................. 104

Specification and part number

are subject to change without

notice

.

NOTE

Содержание WHITEMAN EPOXY/M Series











































































































Отзывы: