PRO SERIES WALK-BEHIND TROWELS • OPERATION MANUAL — REV. #0 (9/21/17) — PAGE 37
OPERATION
5. If starting a warm engine, place the choke lever in the
OPEN position (Figure 44).
Figure 44. Choke Lever (Open)
6. Slowly pull the starter grip (Figure 45) until resistance
is felt, then pull briskly and smoothly to start the engine.
Gently return the starter grip to its original position.
Figure 45. Starter Grip
7. If the engine has started, slowly return the choke lever
to the
CLOSED position (Figure 43). If the engine has
not started, repeat steps 1 through 6.
8. Before operating the trowel, run the engine for
several minutes and check for fuel leaks and loose
components.
OPEN
CLOSE
CHOKE LEVER
STARTER GRIP
INSTACLUTCH™ OPERATION
1. With the engine running, stand in the operator's
position (Figure 46) behind the trowel and grasp both
hand grips securely.
Figure 46. Operator's Position
2. With one hand on the
left-side handgrip, move the
throttle lever (Figure 47) from the
IDLE position to the
RUN position.
Figure 47. Throttle Lever
LEFT
RIGHT
OPERATOR’S
POSITION
NOTICE
The operator must keep at least
one hand on either
grip at all times while operating the trowel.
RUN
IDLE
LEFT-SIDE
HAND GRIP
RIGHT SIDE
THROTTLE
LEVER
