PRO SERIES WALK-BEHIND TROWELS • OPERATION MANUAL — REV. #0 (9/21/17) — PAGE 21
UNPACKING THE HANDLE
The handle (Figure 4) is shipped in the folded, or stowed,
position.
1. To place the folding upper handle in the operational
position, turn the star wheel
counterclockwise to
release it from its folded/stowed position.
2. Pull back on the upper handle to place the handle in
the operational position. Turn the star wheel
clockwise
to secure the handle firmly in place.
Figure 4. Unpacking The Handle
ASSEMBLY AND INSTALLATION
Some components must be installed before the trowel can
be operated. This section provides general instructions on
how to install these components.
FOLDED
POSITION
BOOM WINCH
NOT SHOWN
FOR CLARITY
OPERATIONAL
POSITION
STAR
WHEEL
SET-UP
Handle Tube Installation
Attach the main handle (tube) to the gearbox using the
supplied hardware as shown in Figure 5.
Figure 5. Handle Tube Installation
Vibratory Handlebar Adjustment
The vibratory handlebar is already attached to the main
handle tube.
To adjust the height of the
handlebar
, loosen the star wheel
(Figure 6), and move the
handlebar
to the desired position.
Tighten the star wheel firmly to secure.
Figure 6. Handlebar Adjustment
GEARBOX
3/8" FLAT
WASHER
3/8-16 X 3.25"
HHC SCREW
MAIN HANDLE
(TUBE)
3/8-16
NYLOC NUT
HANDLEBAR
HEIGHT ADJUSTMENT
STAR WHEEL
HANDLEBAR
